| |
KA-38CDL |
| Camera |
| Image Device |
1 /4” Mega-pixel image sensor |
| Effective Pixels |
1280 x 1024 pixels |
| Sensitivity |
1.0V/lux-sec (550nm) |
| Signal to Noise |
44dB |
| Lens |
f:4.3mm / F:1.8 |
| Pan & Tilt |
|
| Manual Pan / Tilt Degree |
180°/ second (max) / 120 °/ second (max) |
| Preset Points |
64 preset points |
| Camera Tour |
16 tours |
| Video |
|
| Video Encoder |
H.264, MPEG4 and Motion JPEG simultaneously (Tri-encoders) |
| Video Profile |
11 profiles simultaneously
- H.264 SXGA/ VGA / QVGA / QVGA
- MPEG4 VGA / QVGA / QVGA
- M-JPEG SXGA/ VGA / QVGA / QVGA |
| Frame Rate |
Mega-pixel mode: Up to 15fps for all 11 profiles / VGA mode: Up to 30fps for all 9 profiles |
| Image Setting |
De-noise / Brightness, sharpness, contrast / Text, time and date overlay |
| Streaming |
Simultaneously multi-profile streaming
Streaming over UDP, TCP, or HTTP
Multicast streaming
M-JPEG streaming over HTTP
Supports 3GPP mobile surveillance
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG4 / H.264) |
| Audio |
|
| Audio Encoder |
RTSP: G.711 64kbps, G.726 32kbps / 3GPP: AMR |
| Audio Streaming |
One-way or two-way |
| Microphone |
Built-in and external microphone |
| Audio Output |
Line level out |
| Network |
|
| Supported Protocols |
TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, Bonjour, UPnP, RTSP, RTP, RTCP, PPPoE, 3GPP, ICMP |
| Security |
Password protection, IP address filtering, user access log |
| Users |
20 simultaneous unicast users / Unlimited users using multicast |
| Ethernet |
10/100M auto negotiation |
| System Integration |
|
| Application Programming |
Open API for software integration / SDK |
| Alarm Triggers |
Intelligent video motion detection and external input |
| Motion Detection |
10-zone video motion detection |
| Alarm Events |
File upload via FTP or email / Notification via email, HTTP, and TCP
Go to PTZ preset position / Audio alerting output |
| Video Buffer |
Pre- and post- alarm buffering |
| General |
|
| RAM / ROM |
128MB / 8MB |
| Power Supply |
12V DC external power adapter |
| Power Consumption |
7W max (with WLAN and LEDs on) or / 5W max (LEDs on but without WLAN) |
| Power over Ethernet |
Built in PoE splitter |
| Connectors |
RJ-45 10BaseT/100BaseTX , DC jack, Audio in/out |
| Indication / Illumination LED |
Two-Color LED / 4 high-light LEDs |
| Construction |
Vandal proof housing with ceiling mout |
| Operating Temperature |
0°C to 40°C (32°F to 104°F) |
| Operating Humidity |
20% ~ 80% (non-condensing) |
KA-38CDL