Video Server K-NVS-4 Home > Product > Video Server > K-NVS-4

4 CH Video Sever   K-NVS-4   > The PnP IP address-supports UPnP protocol. > The PnP cofiguration-USB interface for setup. > The PnP recording-built-in SD card for alarm and schedule recording. > Digitizies video singal and transmits via TCP/ IP network. > Built-in motion detection(96 independent blocks with 5 level of sensitivities per channel). > Supports a wide range of PTZ cameras.   K-NVS-4 Compression Motion-JEPG   Quad-based mode Mux-based mode Resolution & Frame Rate CIF: NTSC---352x240@30FPS x 4 PAL---352x288@25FPS x 4 CIF: NTSC---172x120@30FPS x 4 PAL---176x144@25FPS x 4 NTSC---704x244@15FPS x 4 PAL---704x272@12.5FPS x 4 Video Setting Contrast, Brightness, Hue, Saturation Network Throughout 2.0 Mbyte/Sec Audio One channel, 8 kHz sampling, u-law Alarm Management Alarm IN x 4 Triggers: Alarm Output x 1/ SD card recording/ FTP/ E-mail Motion Detection 96 indepedent blocks with 5 levels sensitivities. Connectors Analog composite video input/ output: 4/1 Ethernet 10 Base T / 100 Base TX, RJ-45 x 1, MDIX Supported Serial port: RS-485 USB port 1.1 device SD card: 32MB~2GB, recording in JPEG Snapshot/ AVI File Pan/ Tilt/ Zoom Support A wide range of analog PTZ dome camera is supported. System Integration Support HTTP-API/ SDK/ ActiveX cpmponent for software integration Support Protocols TCP/IP,DHCP, HTTP,FTP,SMTP,SNTP,DDNS,UPnP,PPPoE Remote Client Software Web browser/ IP-Surveillance Security 10 uses with 3 level authorities Firmware Update SD card/ USB/ FTP Time Stamp Date/ Time/ Title/ Location Dimensions 215(W) x 200(H) x 44.1(D)mm Weight 1068 g Operation Temperature 0˘XC~50˘XC(32˘XF~122˘XF) Power Supply DC12V Power Consumption 6W Regulation CE,FCC